Posts

Key Fob Battery Change Hyundai i10 Grand

Image
Firstly press the button and pull the key upwards. Insert a screwdriver in the key slot and turn it slightly. The fob lid locks will open. Remove the old cell and insert a new CR2032 cell. Here I am using a cheaper one used for PC CMOS cell, which costs me Rs 10 INR. After replacing the cell just put the lid back and press. The new cell is working good, will tell the performance/ life after long term use.

JDSU SmartClass Ethernet Tester

Image
JDSU   SmartClass Ethernet Tester Single RJ-45 port for electrical testing, Single SFP port for optical testing. Menu screens provide a series of selections that take you to another menu screen, a data entry screen, or a results screen. Here we are going to perform L2 Traffic test. Now we will select Optical Ethernet. We are using 1550nm 1.25G SFP. Then start the test. Here Tx Acterna Frames are count of Acterna test frames transmitted since starting the test and Rx Acterna Frames are count of Acterna test frames received since starting the test. Both our Tx and Rx Acterna test frames counts are same means the loopback is without error.

Cisco Router Sample Configuration

Image
Cisco Router configuration 1.      Router>enable 2.      Router#config 3.      Router(config)#hostname ABHAY 4.      ABHAY(config)#interface serial 1/1 5.      ABHAY(config-if)ip address 192.168.155.2 255.255.255.0 6.      ABHAY(config-if)no shutdown 7.      ABHAY(config-if)ctrl-z 8.      ABHAY#show interface serial 1/1 9.      ABHAY#config 10. ABHAY(config)#interface fastethernet 2/3 11. ABHAY(config-if)#ip address 192.168.150.90 255.255.255.0 12. ABHAY(config-if)#no shutdown 13. ABHAY(config-if)#ctrl-z 14. ABHAY#show interface fastethernet 2/3 15. ABHAY#config 16. ABHAY(config)#router rip 17. ABHAY(config)#no auto 18. ABHAY(config)#ver 2 19. ABHAY(config-router)#network 192.168.155.0 20. ABHAY(config-router)#network 192.168.150.0 21. ABHAY(config-router)#ctrl-z 22. ABHAY#show ip protocols 23.   ABHAY#show ip interface brief 24. ABHAY#ping 192.168.150.1 25. ABHAY#config 26. ABHAY(config)#ip name-server 172.16.0.

BSNL Pointred Wimax Configuration Procedure

Image
  Loading Frequency &Root Certificate in t he MS 1.       Log in to the MS with IP : 192.168.0.254 with username : Operator and password : AskLocalExchange 2.       Select Wimax>Profile > Frequency settings To add the frequency Click on Add Button Specify the frequency, bandwidth required & click OK 3.       Select Wimax> Profile > Authentication Settings a.       Select the authentication mode as User Authentication b.       Select EAP Mode as EAP-TTLS c.        Provide the anonymous id. Example if the username provided is wimax40@bsnl.in then the anonymous id should be the username provided. d.       Browse for the Server Root CA cert file with the root certificate provided. e.       Server Root CA cert size should display as 672 bytes. f.         Select the inner mode as MS-CHAPv2 g.       Provide the username given same as anonymous id h.       Provide the password i.         Click on save